0.243*1.75*33"-R Single Garage Door Torsion Spring

CONVENIENT INSTALLATION:

If your garage door has a broken garage door spring, it is reasonably straightforward to replace if you are an experienced DIY enthusiast. This comes with the caveat that you need to be extremely careful when carrying out this procedure, as not following the correct safety measures can be dangerous. But if you know what you are doing and have a few basic tools on hand, you can save yourself a bit of cash by doing it yourself. We have included the installation instructions in the product, please follow the instructions on the specification.

MEASUREMENT:

Torsion springs are available in different lengths, inner diameters, wire sizes, and spring winds. Your install springs must be the correct size to prevent any dangers to you or your home.

• Length of the spring – This is simple;all you need to do is measure from when the spring starts to its end with a tape measure.

• Inside diameter – Using a tape measure for more precision some calipers, measure the spring’s inside diameter typically, it will be 1 3/4 or 2 inches.

• Wire gauge – To measure the wire size, take your tape measure and measure the length of 20 coils. Now with that measurement, divide it by twenty to determine the wire size.